Leclerc Gobelin High-Warp Tapestry Loom

Leclerc Gobelin Loom (High Warp Tapestry Loom)

Modeled after the looms in the “Gobelin” school in Paris, this particular set-up can be used as a tapestry loom or for making rugs. The 2 shaft version has two shafts, a beater and two treadles to make the shed. The warp can obtain a very high tension by tightening two heavy screws located on each side of the loom. The 0 shaft version is a very sturdy tapestry loom and you can add the 2 shafts later. The Leclerc Gobelin Loom is six feet high and has a depth of 20″. Order this high warp tapestry loom today!

GobelinLooms areexcluded from ourFree Shippingpromotion.

Two Shaft Gobelin Loom (Type 2)

• 2 Shaft Frame
• 1 Beater (UP AND DOWN ACTION)
• 2 TREADLE TO MAKE A SHED
• This loom can be use to make tapestries or rugs

No Shaft Gobelin Loom (Type 0)

A very simple loom, completely vertical. Material is stretched from one beam to the other, like the tapestry made in the “Gobelin” school in Paris. This standard loom does not have any beater nor shaft and is used for warp tapestry weaving with string heddles or finger manipulation. A very high tension can be put in the warp by two heavy screws placed on each side of the loom. These screws lower the bottom beam. The rods that hold the warp are inserted in the beams.

Standard Equipment

• 200 heddles (Type 2 only)
• 6 Dent Reed (Type 2 only)
• 1 wood tapestry bobbin
• 12 plastic tapestry bobbins
• “Warp and Weave” and “I Weave, You Weave” books.
• Cords
• Instructions

Specifications

• Depth: 20 (51cm)
• Height: 72 (183cm)
• Shipping weight: 160 lbs (72 kg.) For a 60 loom
• Assembly required