This foot allows you to stitch perfectly in the finished seam of your quilt or binding. It effortlessly follows the natural seam edge, ensuring precise and even stitching. The seam typically has a higher side, where the seam allowances have been pressed, and a lower side, without seam allowances. This foot helps maintain accuracy by guiding along the seam, making it ideal for quilting and binding applications.
How to Use:
- Attach the Foot and Thread the Machine Snap on the Adjustable Stitch-in-Ditch Foot. Use matching thread or invisible thread on top and a bobbin thread that matches your quilt back for a seamless finish.
- Align the Fabric and SewPosition the fabric under the presser foot, aligning the center guide with the seam. The guide will automatically follow the lower side of the seam, ensuring precise stitching along the ditch of your quilt or binding.
- Adjust the Needle Position if Needed If the stitch does not fall directly in the seam, adjust the needle position up to three steps left or right to align it perfectly.
- Pivoting for Corner Turns To pivot 1/4 (6 mm) from the edge, stop sewing when the front marking on the foot aligns with the fabric edge, ensuring precise corner turns for a clean, professional finish.
Guaranteed to fit Husqvarna Viking sewing machine models:
Designer Epic II, Designer Epic III, Epic 95Q
Unconditional Satisfaction Guarantee
