Viking Husqvarna Interchangeable Dual Feed Walking Foot For Cat 5-7 ( not for EMERALD 122, 118 and 116 machines) # 920219096

The Dual Feed Foot with changeable presser feet is designed to feed layers of fabric and/or batting evenly.

It is perfect for quilting, sewing velvet, stretch fabrics, imitation leathers and fabrics need precise pattern matching.

Snap on the Changeable Straight Stitch Foot.

Select the center needle straight stitch. Adjust it up to a maximum stitch length of 6.

Snap on the Changeable Zigzag Foot and select stitches up to a maximum of 7 mm wide and 6 mm and long.

1. Remove the presser foot ankle by unscrewing the ankle screw.

2. Place the Duel Feed Foot onto your machine from the back, positioning the fork over the needle clamp screw. Screw the Dual Feed Foot onto the presser foot bar with the presser foot ankle screw. Reduce presser foot pressure to 3.Snap-on and remove the changeable presser foot

3. With presser foot bar in the up position, place the presser foot under the Dual Feed Foot.4. Push the changeable foot upward